Loading ...
Loading ...
Loading ...
BLAZE Instructional Book
Page | 26
5.
If the burner does not light in 5 seconds, turn the burners off and wait five minutes with the lid off until
the gas clears before attempting to light
it again. Repeat the procedure or try the manual lighting
procedure below.
6.
If the burner does not light after several attempts, immediately close all gas valves and consult an
authorized service technician.
7.
Upon successful lighting, repeat the process on the other burner you wish to light.
8.
To shut off the burners, rotate the knob and turn to OFF. It is normal to hear a popping sound when the
burners are turned off.
9.
Close the valve at the gas supply.
Manually Lighting the Main Burners
WARNING: Do not use standard size matches or cigarette lighters to perform match-lighting procedures. Serious
burns can occur and lighters can explode.
1.
Remove the top stainless steel cover.
2.
If you have just attempted to light the burner, allow five minutes for any accumulated gas to dissipate.
Use caution by standing as far away from the burners as possible. Do not put your hands, arms,
head or any body parts close to the burner when lighting.
3.
Hold your open flame to the top of the burner head.
4.
Push in and turn the control knob to HIGH.
5.
If the burner does not light after five seconds, turn the control knobs to the OFF position.
6.
Wait five minutes until the gas clears before attempting to light it again.
7.
If the burner does not light after several attempts, immediately close all gas valves and consult an
authorized
service technician.
Before cooking with your appliance for the first time, burn off any foreign matter and rid the unit of any odors by
burning the main burners only on HIGH for about 10 minutes.
Flame Adjustment
a. Become familiar with the safety instructions at the front of this manual. Do not smoke while lighting the
appliance or checking the gas supply connections.
b. Make sure that all gas connections are securely tightened and have been leak-tested with a soapy
Loading ...
Loading ...
Loading ...