Control4 C4-APD120-WH White 120V Adaptive Phase Dimmer C4APD120WH

User Manual

For C4-APD120-WH.

PDF File Manual, 4 pages, Read Online | Download pdf file

Compact Fluorescent (CFL)* 500 500 500
LED* 200 200 200
Minimum Load (with neutral)
All load types 1W
Minimum Load (without neutral)
Incandescent (Tungsten) 7W
Halogen 7W
Fluorescent* N/A
Compact Fluorescent (CFL)* N/A
LED* N/A
Environmental
Operational Temperature 0 to 40 ˚C (32 to 104 ˚F)
All load ratings are based on an ambient
temperature of 25 ˚C (77 °F).
Humidity 5% to 95% non-condensing
Storage -20 to 70 ˚C (-4 to 158 ˚F)
Miscellaneous
Control Communications Zigbee, IEEE 802.15.4, 2.4 GHz, 15-channel
spread spectrum radio
Wallbox Volume 5.75 cubic inches
Weight 0.05 kg (0.12 lb.)
Shipping Weight 0.08 kg (0.18 lb.)
*
NOTES:
(1) The maximum load requirements for fluorescent, CFL and LED loads
can vary greatly depending upon the specific fixture and/or bulb being
used. These load types have significant in-rush current which can trip the
protection circuitry on the device.
(2) The quality and performance of these load types varies greatly
from manufacturer to manufacturer. When using these load types, we
recommend testing in advance. If problems are found, simply changing to
a dierent bulb manufacturer may solve the problem.
(3) Additionally, we do not recommend the use of fluorescent, CFL, or
LED loads without a neutral wire connected to the dimmer due to the
capacitive nature of these load types.
(4) Wiring with a neutral is always the preferred wiring method (if
possible).
Warnings and considerations
WARNING! Turn OFF electrical power before installing or servicing this
product. Improper use or installation can cause SERIOUS INJURY, DEATH
or LOSS/DAMAGE OF PROPERTY.
ATTENTION! Coupez l’alimentation électrique avant d’installer ou de
réparer ce produit. Une mauvaise installation ou utilisation peut entraîner
des blessures graves, décès ou perte / dommages à la propriété.
WARNING! This device must be protected by a circuit breaker (20A max).
ATTENTION! Cet appareil doit être protégé par un disjoncteur (20A max.)
WARNING! Ground this device in accordance with the National Electric
Code (NEC) requirements. DO NOT rely solely upon the yoke plate’s
contact with a metal wallbox for adequate grounding. Use the device’s
ground wire to make a secure connection to the safety ground of the
electrical system.
ATTENTION! Cet appareil doit être en conformité avec le Code national
de l’électricité (NEC). Ne comptez pas uniquement au contact de la
plaque avant avec un boîtier mural métallique pour la mise à la terre
adéquate. Utilisez cet appareil à la terre de l’appareil pour établir une
connexion sécurisée au système électrique.
Supported models
C4-APD120 Adaptive Phase Dimmer, 120V
C4-APD277 Adaptive Phase Dimmer, 277V
Introduction
The Control4® Adaptive Phase Dimmer operates independently or as part of a
Control4 home automation system. It installs in a standard back box using typical
wiring standards and communicates to the Control4 system using a wireless
connection.
Box contents
Adaptive Phase Dimmer
• Wire nuts
• Warranty card
Adaptive Phase Dimmer Installation Guide (this document)
Specifications and supported load types
Model numbers C4-APD120-xx, C4-APD277-xx
Power requirements C4-APD120: 120V AC +/-10%, 50/60 Hz
C4-APD277: 277V AC +/-10%, 50/60 Hz
This device can function with or without a
neutral AC connection depending on load type.
Wiring with a neutral is always the preferred
wiring method (if possible). See load types and
“Sample Wiring Configurations” below.
When wired without a neutral, loads may
appear dimmer.
Power consumption C4-APD120: 714mW; C4-APD277: 2.44W
Load types and ratings
Supported load types Incandescent, halogen, electronic (solid state)
low voltage (ELV) transformers, magnetic
(iron core, inductive) low voltage (MLV)
transformers, phase-dimmable fluorescents,
compact fluorescents, and LEDs.
C4-APD120 maximum load 1 Gang 2 Gang 3+ Gang
Incandescent (tungsten) 600W 550W 500W
Halogen 600W 550W 500W
Fluorescent* 300W 300W 300W
Compact fluorescent (CFL)* 300W 300W 300W
LED* 120W 120W 120W
C4-APD277 maximum load 1 Gang 2 Gang 3+ Gang
Incandescent (tungsten) 1000 900 800
Halogen 1000 900 800
Fluorescent* 500 500 500
Adaptive Phase Dimmer
Installation Guide
Loading ...
Loading ...
Loading ...

Other documents for Control4 C4-APD120-WH

The following documents are available:
User Manual Other Documents
  • Comparison Sheet - (English) Download
  • Lighting Design Guide - (English) Download
  • Quick Start Guide - (English) Download
  • Specification Sheet - (English) Download
Photos

Specifications

See other models: C4-SR260