Loading ...
Loading ...
Loading ...
Operating Instructions
1. Plug the power supply cord into a grounded wall outlet (120VAC, 60Hz).
Important: This heater comes with a grounded (three-prong) plug. The
grounded plug must be used with a grounded outlet. Do not use an adapter in a
two-slot wall outlet unless the ground plug of the adapter properly connects to a
building ground. Using the heater without a properly grounded outlet or adapter
could result in an electric shock hazard.
The cord has a plug as shown at A in the figure that follows. An adapter, as
shown at C, is available for connecting three-blade grounding-type plugs to
two-slot receptacles. The green grounding lug extending from the adapter must
be connected to a permanent ground such as a properly grounded outlet box.
The adapter should not be used if a three-slot grounded receptacle is available.
2. TURNING THE HEATER ON
To turn the heater ON, press the POWER button; the power LED will turn on
and the heater will wait in STANDBY Mode.
3. HEATING MODES
Press the MODE button to toggle between the different modes: ECO, HIGH,
LOW and STANDBY.
4. ECO MODE – 1500W/1000W
ECO mode is a computerized mode to optimize energy efficiency. It will
programmatically select between HIGH and LOW power mode to heat up the
room to the desired temperature in the most effective way. Once the
desired temperature is achieved, the heater will maintain the room to the set
temperature. ECO mode is the environmentally friendly operating mode.
5. HIGH POWER MODE – 1500W
HIGH mode will control the heater to operate at high power until the room
reached the set temperature. The heater will stop heating and initiate
component cooling process before turning off the fan. Once the desired
Loading ...
Loading ...
Loading ...