Loading ...
Loading ...
Loading ...
14 15
Adding Lubricating Oil
Always use clean fresh oil as specified on page 9. Incorrect
or old oil can cause the pressure washer to run rough and
damage the motor; this will not be covered by warranty.
1. Ensure that engine is OFF when filling oil.
2. Remove oil plug, see Pic. 11A.
3. Use oil as detailed on page 9 (SAE 30W or SAE 15W-40
4 Stroke Motor Oil).
4. Ensure pressure washer is level when filling with oil.
DO NOT TIP / USE A FUNNEL (Not Supplied).
5. Only fill oil to the top of the thread, Pic. 11B.
6. Ensure that the oil filler cap is screwed on tightly before
attempting to start the pressure washer.
Warning: Over filling the oil can damage the pressure
washer, this damage will not be covered under warranty.
Detergent Bottle (PIC. 12)
NOTE: Only use detergents and cleaners specifically for
pressure washers and of a neutral pH.
1. Pull lid off.
2. Fill with as much detergent/cleaner as is required.
The maximum is 3 litres (3L). The level of the
detergent/cleaner fluid should be below the neck
of the bottle as indicated on Pic. 12.
3. Push lid on
NOTE: The detergent will only flow when the low pressure
black nozzle is used.
OIL
LEVEL
PIC. 11B
PIC. 11A
PIC. 12
MAXIMUM
CLEANING
FLUID LEVEL
Loading ...
Loading ...
Loading ...