Loading ...
Loading ...
Loading ...
OWNER’S MANUAL 1186527 REV 6 (8/14)
PAGE
7
OF 21
INFRARED/RADIANT COMPACT BROILER
If the broiler is to be mounted over a range, a special ue riser is shipped with the broiler and range. Depending on the
shipping requirements, the broiler, ue-riser, and range base may already be partially or completely assembled.
1. Attach the ue riser to the rear of the range using the installation procedure included in the range manual, but do
not attach the wall shield (the back of the ue riser) yet.
2. Lift the broiler (using two people is recommended) and hook the broiler-hook over the top-front edge of the ue
riser. If necessary, move the broiler left or right so that the holes in the top of the broiler hook line-up with the
holes in the top of the ue riser, then secure the broiler-hook to the ue riser using three #10 self tapping screws
provided.
3. Secure the bottom of the broiler to the ue riser with the four 1/4” self-tapping screws provided. The holes are
accessible from the rear of the unit behind the wall shield.
4. Attach the wall shield, which forms the rear of the ue riser. The gas supply inlet extending out from the rear of the
broiler should be accessible through the corresponding hole on the back of the ue riser.
5. Go on to Step 3.
STEP 2A: MOUNT ON FLUE RISER OF RANGE
Mounting of Infrared Compact Broiler on Flue-Riser
Figure 2
INSTALLATION
Loading ...
Loading ...
Loading ...