Loading ...
Loading ...
Loading ...
6
18. Locate factory drilled holes at bottom right corner of
rear panel. Align water valve bracket with factory drilled
holes. You may have to bend the metal tubing slightly
out of the way. Use a power drill with a Phillips® head
bit to drive two self tapping screws (4) through bracket
and into cabinet.
NOTE
Clean back of cabinet with a commercial household
cleaner, ammonia or alcohol before applying plastic
clamps to water tubing.
19. Secure plastic water tubing to rear of cabinet with two
plastic clamps (9).
20. Punch out cutout on access cover to allow for water
valve (interior condenser models only).
21. Remount access cover (interior condenser models only)
and condenser, if it was pulled out of the way because
of space constraints.
Figure 14
OR
Water Valve (10)
Factory
Punched
Holes
Screw (4)
Water Valve (10)
Factory
Punched
Holes
Screw (4)
Plastic Clamp (9)
Figure 15
Cutout
Sound Baffle
Figure 16
Loading ...
Loading ...
Loading ...