Loading ...
Loading ...
Loading ...
O
0
0
0
BLIND HEMMING
1. Fold material and baste hem.
2. Make second fold overlapping basting as shown.
3. Straight stitch for approximately _ inch, then zigzag one
stitch using black #3 stitch width position, catching
second fold as shown. Continue this procedure until hem
is completed.
4. Unfold, exposing right side of material with completed
blind stitching. Remove basting and press hem.
SEWING ON BUTTONS
I, Turn feed dog control to left. Place needle into left hole of
button, align holes with slot of presser foot and lower
presser foot.
2. Set stitch width control at width between holes of button.
Test width by turning handwheel slowly. Take several
zigzag stitches to sew on button, ending with needle on
left side.
. Set stitch width control at the red dot. Take a few stitches
in left hole of button to lock threads.
Pull threads to wrong side,
NOTE: To make a small thread shank when sewing on a flat
button, place a straight pin or needle between the
holes of the button.
25
Loading ...
Loading ...
Loading ...