User Manual - Page 8

For A4WMSTPN1.

Loading ...
Loading ...
Loading ...
8
Best results are achieved on:
• Fresh stains that have not completely set.
• Stains that have been previously washed but not dried in a dryer or ironed.
• Small stains confined to a small area of the garment.
Less eicient on:
• Set-in or old stains.
• Stains that have been previously washed and dried in a dryer or ironed.
• Large stains, spread across a large area of the garment.
8. CLEANINGANDMAINTENANCE
Quick cleaning instructions:
1. Disconnect the connector from the Stain Remover Pen.
2. Dry the cup and the base if it has been filled with water.
3. Clean the tip with a damp cloth.
4. Sto the Pen in its cradle and wind the power cord into a coil.
5. Store the unit in a dry and well-ventilated area.
NOTE: Never use abrasives, alcohol, solvents or any other chemicals to clean the unit.
9. WHAT TO DO IF...
If there is a fault, first try to find a solution in the troubleshooting table below.
If you cannot find a solution to the problem, contact an after sales customer service centre.
Troubleshooting table
Problem Causes Solutions
The unit will not turn
on or has stopped
working
Pre-set cooldown activated. Wait 1 min and resume
operation.
Plug not properly inserted. Plug the power cord into the
unit and the plug into the
power outlet.
Power button defect. Contact an authorised AEG
service center.
10. TECHNICALDATA
Product Stain Remover Pen
Model A4WMSTPN1
Colour White
Voltage (V) 220-230
Power rating (W) 7.0
Frequency(Hz) 50-60
Net weight (Kg) 0.34 g (0.75 lbs)
Loading ...
Loading ...
Loading ...