Loading ...
Loading ...
Loading ...
12
1. Auto-Restart
If the unit loses power, it will automatically restart with the prior settings once power has been
restored.
2. Anti-mildew
When turning off the unit from COOL, AUTO (COOL), or DRY mode, the air conditioner will continue
to operate at very low power to dry up condensed water to prevent mildew growth.
3. Louver Angle Memory
When turning on your unit, the louver will automatically resume its former angle.
4. Refrigerant Leakage Detection
when the unit detects any refrigerant leakage.
5. Sleep Operation
This function is used to decrease energy use while you sleep (and don’t need the same temperature
settings to stay comfortable). This function can only be activated via remote control and is not
available in FAN or DRY mode.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1 hour, and will increase an additional 1°C (2°F) after
another hour. When in HEAT mode, the unit will decrease the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F) after another hour. The sleep feature will stop after 8 hours
Set
temperature
1hr
1hr
Keep
running
SLEEP Operation
Saving energy during sleep
Heat mode(-1 C/2 F) per hour
for the first two hours
Cool mode(+1 C/2 F) per hour
for the first two hours
6. Follow Me Operation
If you feel comfortable with the ambient temperature where you are, you can use the remote control to
send a signal to the air conditioner, which will be set to this temperature quickly.
• To activate this feature, press FOLLOW ME button, the remote control displays the ambient
temperature and send signal to the unit every 3 minutes.
• If the indoor unit doesn’t receive the signal for 7 minutes or pressing FOLLOW ME button again, the
Follow me function will terminate.
Operating Instructions
Loading ...
Loading ...
Loading ...