Loading ...
Loading ...
Loading ...
About the ntro, ls on the Air Conditioner
The controls will look like one, of the following.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
CAUTION
When the air conditioner has been performing its cooling operation and is turned off
or set to the fan position, wait at least 3 minutes before rescuing to the cooling
operation again
FUNCTION
Thermostat
War_r (_oler
'Wait T h_ee #ir_te_.
H_ghCeol
• THERMOSTAT
Turn the thermostat control to the desired
setting. The centrol position is a normal setting
for average conditions. You can change this
setting, if necessary, in accordance with your
temperature preference.
The thermostat automatically controls cooling or
heating, but the fan runs continuously whenever
the air conditioner ksin operation. If the room is
too warm, turn the thermostat control clo_wise.
If the room is too cool, turn the themostat @ntroI
anticlockwise.
• Auto Swing
ON : Starts the operation of air swing.
OFF : Stops the operation of air swing.
Please turn off Auto Swing when Operation Switch
iS Off. Auto Swing
Off On
• OPERATION
OFF ( 0
FAN ( O
LOW COOL (
HIGH COOL ( _{}_
LOW HEAT (_)
HIGH HEAT ( _ )
:Turns the air conditioner off.
Permits the low fan speed
operation without cooling
(heating).
Permits cooling with the low
fan speed operation.
Permits cooling with the
high fan speed operation.
Permits heating with the low
fan speed operation.
Permits heating with the
high fan speed operation
A slight heat odor may come from the unit
when first switching to HEAT after the
cooling season is over. This odor, caused
by fine dust particles on the heater, win
disappear quickly.
Loading ...
Loading ...
Loading ...