Loading ...
Loading ...
Loading ...
www.CasablancaFanCo.com
1.888.227.2178
9
Wiring
Blue
Blue
Grounding
G
r
e
e
n
/
Y
e
l
l
o
w
S
t
r
i
p
e
Green/Yellow Stripe
Black
Black
Ungrounded
Connect the three grounding
wires (green, green/yellow
stripe, or bare copper) coming
from the ceiling, downrod, and
hanging bracket.
Connect the yellow wire
from the receiver to the
black wire from the fan.
Yellow
Connect the blue
wire from the
receiver to the blue
wire from the fan.
Connect the white (grounded) wire
from the ceiling to both the white
wire from the receiver and the white
wire from the fan.
White
White
Grounded
Connect the black (ungrounded) wire from the
ceiling to the black wire from the receiver.
Slide the
remote
receiver onto
the top of the
bracket.
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualied electrician.
Turn the wires upward and push them carefully back through the hanger bracket
into the outlet box. Make sure that the wires are still attached to the wire nuts.
Receiver
Note: If using the optional Low Prole
canopy, you may need to carefully tilt the
fan assembly at an angle while connecting
the wires.
Be sure to tilt the fan AWAY from the
opening in the ceiling bracket and ensure
the fan does not fall.
Note: Push the bare metal
ends of the wires together
and slide a wire nut over
them. Then, twist the
wire nut clockwise until
tight. Give it a gentle pull
to make sure none of the
wires are loose.
WARNING
The ceiling fan must be grounded. If the
ground wire for the installation site is not
present, immediately STOP installation and
consult a qualied electrician.
M8555-01 • 01/07/20 • © 2020 Casablanca Fan Company
Loading ...
Loading ...
Loading ...