Loading ...
Loading ...
Page 3 of 4
210616
ASSEMBLY INSTRUCTIONS (continued)
3
4. Pull out the source
wires from the outlet
box, make wire
connections using
Green Ground
Screw
wire connectors(CC)
as follows:
---Connect the black
(hot) wire from the
fixture to the black
Threaded Pipe
(hot) wire from the
power source.
---Connect the white
(neutral) wire from the
fixture to the white
(neutral) wire from the
power source.
---Attach the fixture
ground wire(bare
wire) to the mounting
plate unit(AA) with the green ground screw, then
connect the fixture ground wire to the house ground
wire with a wire connector(CC).
Carefully put all of the wires back into the outlet box.
5. Attach the canopy(A) to
Fixture Mounting
Screw
the mounting plate unit
(AA) by aligning and
inserting the two fixture
mounting screws from
the mounting plate unit
(AA) into the open holes
on the canopy(A), then
secure the canopy(A)
with two bolt nuts(DD).
3. Attach the rod(MM) to the
fixture using the threaded
pipe.
Attach the acrylic plate(B)
to the rod(MM), and then
secure it with the metal
pad(LL) and hex nut(KK).
Attach the frame(C) to the
rod(MM), and then secure
it with the finial(NN).
4
5
6
Turn on the power at the
fuse or circuit box.
6. Install 2x60W Candelabra
base bulbs. (not included)
See relamping label at
socket area or packaging
for maximum allowed
wattage.
C
CC
AA
A
AA
DD
A
Candelabra base bulb
Max.60W
(not included)
LL
KK
NN
B
MM
Loading ...