Loading ...
Loading ...
Loading ...
7. RemovethepartsforthetophingeasshowninTopHinge
graphic.Lifttheleft-handsidedoorfromthebottomhinge
pin.
NOTE:Onsomemodels,removetheshimfromthebottom
hingepinandkeepitforlateruse.SeeBottomHingegraphic.
8. Usinga3/8"hexwrench,removethelevelinglegbracketsfrom
thebottomofthecabinet.Keepscrewsforlateruse.
ReplaceDoorsandHinges
1. AssemblethepartsforthetophingeasshowninTopHinge
graphic.Donottightenthescrewscompletely.
2. ReplacethepartsforthebottomhingeasshowninBottom
Hingegraphic.Tightenscrews.Replacetherefrigeratordoor.
NOTE:Provideadditionalsupportfortherefrigeratordoor
whilethehingesarebeingmoved.Donotdependonthedoor
gasketmagnetstoholdthedoorinplacewhileyouare
working.
3. Alignthedoorsothatthebottomoftherefrigeratordoor
alignsevenlywiththetopofthefreezerdrawer.Tightenall
screws.
4. Reconnectthewiringplugontopoftheleft-handside
refrigeratordoor.
5. Reconnectthewaterlinesbyfirmlypushingonelineinside
theother.Slidetheblacklockingcollarfullyforward.
6. Whileholdingthetabbedsectionofthewaterline,turnthe
lockingcollarcounterclockwiseuntilyouheara"click."
NOTE:Thearrowonthetabbedsectionshouldalignwiththe
twobarsonthelockingcollar.
7. Checkforleaks.Replacethetophingecovers.
Remove and Replace Freezer Drawer
IMPORTANT: Two people may be required to remove and
replace the freezer drawer. Graphics are included later in this
section.
Remove Drawer Front
1. Open the freezer drawer to full extension.
2. Loosen the four screws attaching the drawer glides to the
drawer front. See Drawer Front Removal graphic.
NOTE: Loosen screws three to four turns. Keep the screws in
the drawer front.
3. Lift drawer front upward and off the screws. See Drawer Front
Removal graphic.
Replace Drawer Front
1. Slide the drawer glides out of the freezer compartment. Insert
the screws in the top of the drawer front into the slots in the
drawer brackets. See Drawer Front Replacement graphic.
2. Pull the drawer brackets toward you to position the two
screws in the bottom of the drawer front into the brackets.
See Drawer Front Replacement graphic.
3. Completely tighten the four screws.
Final Steps
1. Replacethe base grille.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug into a grounded 3 prong outlet.
3. Return all removable parts to doors and drawer and food to
refrigerator and freezer.
6
Loading ...
Loading ...
Loading ...