Loading ...
Loading ...
4 5
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
If the information in this manual is not followed exactly, a fire
or explosion may result causing property damage, personal
injury or death.
Do not store or use gasoline or other flammable vapors and
liquid in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
- Do not try to light any appliance.
- Do not touch any electrical switch.
- Do not use any phone in your building.
- Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
- If you cannot reach your gas suppliers, call the fire depart-
ment.
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
!
WARNING
IMPORTANT
SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE. READ AND SAVE
THESE INSTRUCTIONS FOR FUTURE REFERENCE. OBSERVE ALL
GOVERNING CODES AND ORDINANCES.
The manufacturer will not be responsible for any damage to
property or to persons caused by incorrect installation or improper
use of the appliance.
The manufacturer reserves the right to make changes to its
products when considered necessary and useful, without affecting
the essential safety and operating characteristics.
This appliance has been designed for non-professional, domestic
use only.
This appliance shall only be installed by an authorized person and shall
be installed in accordance with the manufacturers installation instruc-
tions.
IMPORTANT
This appliance must be installed in accordance with the norms in force
of the country concerned. The installation of this appliance must con-
form to local codes and ordinances. In the absence of local codes, In-
stallations must conforms to American National Standards, National
Fuel Gas Code ANSI Z223.1 – latest edition** or B149.1. If local codes
permit, a flexible metal appliance connection with the new AGA or
CGA certified design, max. 5 feet (1,5 m) long, 1⁄2” I.D. recommended for
connecting this cooktop to the gas supply line.
Do not bend or damage the flexible connector when moving the
cooktop. The pressure regulator has 1⁄2” female pipe thread. You will
need to determine the fitting required, depending on the size of your
gas supply line, the flexible metal connector and the shutoff valve.
The appliance, when installed, must be electrically grounded in accor-
dance with local codes or, in the absence of local codes, with the Na-
tional Electrical Code, ANSI/NFPA 70.
The appliance and its individual shutoff valve must be disconnected
from the gas supply piping system any pressure testing of that system
at test pressure in excess of 1⁄2 psi (3,5 kPa).
The appliance must be isolated from the gas supply piping system by
closing its individual manual shutoff valve during any pressure testing
of the gas supply piping system at test pressures equal to or less than
1⁄2 psi (3.5 kPa).
For use with a pressure regulator. The regulator supplied must be used
with this appliance. The gas appliance pressure regulator must be set
for the gas with which the appliance is used.
which the appliance is used.
Loading ...
Loading ...
Loading ...