Loading ...
Loading ...
Loading ...
9
1. Remove all packaging materials, including those that may be inside the
toasting slots or toasting lever slots.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use abrasive
cleaners.
3. Do not put the toaster, cord or plug in water.
4. Make sure the crumb tray is pushed all the way into the back of the toaster
and the toasting lever is in the UP position.
5. Unwrap the power cord from the cord storage area on the underside of the
toaster and plug into a 220- 240V AC outlet.
6. Turn the browning selector dial to the lightest setting.
7. Lower the toasting lever until it locks in place. Operate without bread once or
twice to burn off any manufacturing residue. You may notice a light amount of
smoke; this is normal and will stop as the heating elements continue to heat.
1. Make sure the crumb tray is pushed all the way into the back of the Toaster
and the toasting lever is in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
3. Place the toaster on a flat, level, heat resistant surface.
4. Plug the power cord into a 220-240AC electrical outlet.
5. Position the browning control to desired setting. To test toasting times for
browning, it is best to use both toasting slots and position the browning
control between 3 and 4 and then adjust each subsequent toasting to your
preference.
6. Remove all protective wrappings from food before placing it into the toasting
slots.
7. Insert bread or toaster food into the toasting slots.
8. Lower the toasting lever until locked into place. When the bread is lowered into
position, toasting will begin.
9. When the toast reaches the selected browning level, it will pop up
automatically.
10. Remove the bread from the toasting slots. Use care when removing the bread,
as the bread and the top of the toaster will still be hot.
11. If your toast jams, unplug the cord and move the loading lever up and down a
few times to raise jammed bread.
12. To interrupt toasting, press the corresponding CANCEL button.
13. Unplug the cord from the wall outlet when not in use.
NOTE: To prevent a fire hazard, never place bread over the opening of the toaster,
only into the slots.
4 - Before First Use
5 - Using Your Appliance
Loading ...
Loading ...
Loading ...