KitchenAid KUDL40CVWH4 undercounter dishwasher

User Manual - Page 3

For KUDL40CVWH4.

PDF File Manual, 52 pages, Download pdf file

Loading ...
Loading ...
iNSTALLATiON REQUIREMENTS
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools needed:
_,. /_ z_2 Flat-bade
ruers I screwdriver
5/16" and 1/4" _ ' UL listed or CSA
nut drivers or _f approved twist-on ff
hex sockets _ wire connectors* v
10" adjustable wrench 5/8" open -end
that opens to wrench
1.18" (2.9 cm) _.
If installing custom front panels, _y
Torx T15 screwdriver _'
-Must be the proper size to connect your household wiring
to 16-gauge wiring in dishwasher
Other useful items you may need:
F ash ight _ Bathtowe _
Parts supplied:
@ sCrows
r Green
Make sure all these parts are included in the literature package.
Parts needed:
90° ElboW fitting with 3/8_, Tefl0n_ tape Or pipe
N.RT, external threads (the joint Compou[
other end mUSt fit yOUr Water
Supply line)
4 #10 x 1/2" wood screws (if installing custom front panels)
® Teflon is a registered trademark of E.I. Du Pont de Nemours and Company.
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Other parts you may also need:
1i " 2"
/2-
1!38:1_5:0em) I Masking or
i Screw-type
[damps_3max)J
NOTE: Parts available for purchase Jn plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first=time installations
Tools needed:
Iwith 1/2 513/4 7//,
_and11!2 h01e_]
saw bits ...................
Parts needed:
C0ppei tubing (3/8!'
OiD. suggested) o[
flexible braided
W_e
see "Electrical Requirements" Section
Fo[ Direct wire: For Power supply
i use UL listed or Card: useUL
CSA approved listed power
i st[ain;re!ief to Supply cord kit
i fit7/8 (2.2cm) marked for use
hoe with dishWasher
Additional parts supplied with top=venting models only:
Torx.so 10x , ,hex a scewsi
Additional parts supplied with certain models only:
I Bottom Sound pad (located I Moisture bairier tape
[in lower rack) [ l
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230.
Loading ...
Loading ...
Loading ...