Loading ...
Loading ...
Loading ...
7
English
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
CAUTION: Ensure the battery is removed
before removing extension attachment
1
or end
attachment end
2
. An attachment must be attached
to the housing before use.
Attachments (Fig. B, C)
Blower
To connect the extension attachment, end attachment or
inflator/deflator attachment to the blower outlet:
1. Line up the pegs
11
on the inside of the attachment
with the notches
12
of the housing opening.
2. Push the extension attachment
1
onto the blower
housing and turn left to lock. Pull on the attachment to
ensure it is securely in place.
3. To remove the extension attachment
1
, turn right to
unlock and pull it off of the blower housing.
Fig.B
1
11
12
Deflator
To connect the inflator/deflator attachment
8
to the
deflator intake
9
:
1. Line up the detents on the attachment with the notches
on the top, bottom and sides of the intake.
2. Press the adapter onto the intake.
3. To remove the inflator/deflator attachment from the
tube or intake, pull the adapter away from the tool.
Fig.C
9
8
OPERATION
WARNING: To reduce the risk of
serious personal injury, turn tool off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
WARNING: Do not operate blower
without tube securely in place. Never reach down into
housing through tube hole.
WARNING: Always remove the
batterywhen:
• You leave blower unattended or when storing.
• Checking, adjusting, cleaning, or working
onblower.
Installing and Removing the Battery Pack
(Fig. D)
nOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack
6
into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does notdisengage.
To remove the battery pack from the tool, press th e release
button
7
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of thismanual.
Fig.D
6
7
Proper Hand Position (Fig. E)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
asshown.
WARNING: To reduce the risk of serious
personal injury, always hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main
handle
13
.
Loading ...
Loading ...
Loading ...