Loading ...
Loading ...
Loading ...
The operation of any lawn mower can
result in foreign objects thrown into the
eyes, which can result in severe eye
damage. Always wear safety glasses or
eye shields while operating your lawn
mower or performing any adjustments or
repairs. We recommend a wide vision
safety mask over spectacles or standard
safety glasses,
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory
for optimum performance. Speed is not
adjustable_
ENGINE ZONE CONTROL
ACAUTION: Federal regulations require
an engine control to be Installed on this
lawn mower in order to minimize the risk of
blade contact injury. Do not under any
circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
- Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start and
operate the lawn mower.
TO ADJUST CUTTING HEIGHT
° Raise wheels for tow cut and lower wheels
for high cut.
• Adjust cutting height to suit your require-
ments. Medium position is best for most
lawns.
- To change cutting height, squeeze adjuster
lever toward wheel. Move wheel up Or
down to suit your requirements. Be sure all
wheels are in the same setting°
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs.
Plate Tab
Lower Wheels for High Cut _ _
-over
Raise Wheels for Low Cut
TO ATTACH GRASS.CATCHER
. Close the flip lid. Flip lid must be closed
while operating lawn mower.
• Lift the rear doer on the mower housing and
place the grass catcher frame onto the
formed tabs on the rear door hinge bracket.
• The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the grass catcher frame.
_kCAUTION: Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear door
removed or propped open.
Hinge
Rear door
Grass catcher
frame
Formed
tabs
TO EMPTY GRASS CATCHER
. To remove grass catcher, release operator
presence control bar to stop engine,
• Lift up rear door and remove the grass
catcher by the handle°
NOTE: Do not drag the bag when
emptying; it will cause unnecessary wear.
7
Loading ...
Loading ...
Loading ...