Loading ...
Loading ...
Loading ...
CLEANING & MAINTENANCE
Cleaning the permanent HEPA-type filter
1. Turn off and unplug unit.
2. Unscrew the Filter Lock Mechanism by turning it counter-clockwise at the bottom of the unit
(see diagram of Main Parts).
3. Remove the inlet grill from the unit as shown below.
4. Remove the HEPA-type filter from the air inlet grill.
5. To clean the permanent HEPA-type filter, use the brush or crevice attachment with a vacuum
cleaner. Run the attachment along the inlet and outlet side of the filter, cleaning between the
crevices as much as possible. Do not use water or any household cleaners or detergents to
clean the permanent HEPA-type filter. Replace in reverse order.
OPERATING THE THERAPURE
®
TPP100
Keep the Therapure
®
TPP100 functioning properly by cleaning the permanent HEPA-type filter every
four weeks of use. More frequent cleaning will be necessary if the unit is located in an area with a
high level of airborne contaminants (excessive amounts of smoke, pet dander, etc.).
Exposing the Therapure
®
TPP100 to candle/oil/fireplace soot and smoke is not recommended
and will require more frequent cleaning.
NOTE: Always make sure the Therapure
®
TPP100 is turned off and unplugged before cleaning.
» Vacuuming will restore performance of the permanent HEPA-type filter. However,
the filter may appear stained. This is normal and does not affect performance in any way.
» Do not use water or any household cleaners or detergents to clean the permanent
HEPA-type filter.
» The inlet grill may be cleaned (after unit is turned off and unplugged) with a vacuum
or a slightly damp cloth.
Unit Base
Clean the
HEPA-type filter
Air Inlet Grill
Filter Lock Mechanism
Start by unscrewing
this from the bottom
T P P10 0
98
Loading ...
Loading ...