Loading ...
Loading ...
Loading ...
Installation
51
EN
opens on rear
Hob seal
To prevent leakage of liquid between the
frame of the hob and the work surface,
place the insulating seal provided in
position before assembly, as shown in the
figure below.
1. Refer to the dimensions in the figure,
bearing in mind that all the sides "A" of
the seal must brush against the hole.
2. Use light pressure to make the seal stick
to the edge around the hole cut in the
worktop.
3. Carefully trim the surplus away from
edge (C) beyond the seal.
5.4 Fixing to the supporting structure
Secure the hob to the piece of furniture
through the appropriate bracket (A).
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with
sharp or hot parts.
Do not fix the hob using silicone.
This would make it impossible to
remove the hob, if necessary,
without damaging it.
Loading ...
Loading ...
Loading ...