Loading ...
Loading ...
Loading ...
English32
Installation instructions
Installation instructions
Connecting the gas supply
1. Shut off the main gas-supply valve before disconnecting the old rangetop.
2. Complete the gas hookup.
3. Open the gas valve, and relight the burners on any other gas appliances.
NOTE
Because hard piping restricts movement of the appliance, use a CSA International-certified
flexible metal appliance connector unless local codes require hard piping.
WARNING
Follow the information in this manual exactly to avoid a fire or explosion, which may
cause property damage and personal injury or death.
• Do not store or use gasoline or other flammable liquids near the appliance.
• IF YOU SMELL GAS:
- DO NOT light a match, candle, or cigarette.
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch.
- DO NOT use any phone in your building.
- Clear the room, building, or area of all occupants.
- Immediately call your gas supplier from a neighbor’s phone. Follow the gas
supplier’s instructions.
- If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified installer, service agency, or
gas supplier.
• Be sure to install the included gas regulator with the appliance. Do not use the
appliance without the regulator installed.
• Make sure the arrow on the regulator points toward the appliance.
• Do not overtighten gas connections and fittings.
• Before use, test the gas lines for leaks as instructed. Do not use a flame to check for
leaks.
Loading ...
Loading ...
Loading ...