Loading ...
Loading ...
Cleaning and Maintenance
1. Turn off the switch
“o” for OFF
“-”for ON
2.
3. Take off the hose and floor
brush
4.Pull out the head as
shown in the picture
6.Clean the tank and dry
with a soft cloth
5.Pull out the filter, wash and
dry it for next use
Protective Device
Special instructions for the protective device
When the tank is full of water, this Protective Device will
rise up. Suction power will stop but an abnormal noise may
indicate that the motor is running at a high speed. If this
happens, cut off the power immediately and pour out the
water from the tank.
When vacuum cleaner overturns or shakes excessively, the
Protective Device may not work correctly. What you should do
is to switch off the machine and turn it upright before
continuing to use the vacuum.
When the tank is full of water, the Protective Device will rise up, suction power will cut off. Pour out all
the water from the tank before resuming operation.
Raising of
water level
Operation
To avoid damages or injuries, do
not move vacuum when the clips
are unlocked.
Use wire and plug correctly
Pull out the plug when not in use
This is to avoid possible
electric shock or fire, etc.
Avoid incorrect operation
Do not put metal into the connector
of this machine (To avoid electric shock)
Do not pull the plug by the wire
Do not pull or move the machine by
pulling the hose
Please use the handle to move or
pull it
Keep the vacuum at a safe distance from fire/heat source or sunlight
To prolong your vacuum's life
Do not collect the following
as it may
cause vacuum's breakdown:
Construction rubbish / powder
Ash or any flammable material
Glass/tins/needles/toothpicks
Ropes/stockings or the like
Do not use the hose or the rod to collect dust
directly to avoid wear
Always use the floor brush or crevice nozzle etc. to
pick up dirt / water
Do not block the air-outlet
If the suction mouth is blocked, unblock it first
before using the vacuum
Use the hose carefully to avoid
damage
To avoid the motor overheating,
do not use it continuously for more
than half an hour. Also, it's time to
service the vacuum when:
The tank is full of dust / dirt
The suction mouth is blocked
The hose, rod or nozzle is blocked
Please check whether the cloth or HEPA filter is
installed before operating
Pull out the plug and put
the wire in order
IMPORTANT REMINDERS
Loading ...