Loading ...
Loading ...
Loading ...
Check Brake Operation _
C_O_ Tim P_m
Check OperatorPresence and
T Interlock Systen_
R CheckforLooseFaste_rs t/ t/_ t/
A SharpervReplace M°wer Blades i_ s
T L,_,_.o. Ch_
0 CheckBattwyLeve0
R c_=nBatteryandTerminals _ I_
Check Transaxle Cooling
CheckV-Beb
v' v'
Ch=ngeEng_eO_l(w_hoarater) I_',_ I/
E Change Englne Oil (w_hout oil filler) _,_t
v'
N CleanAirFiltmr IS=
G Clean Air Screen _=
NI i,_pectMumer,'Spark
Attester
v'
E P.eple_oJR_r (Heq_ I_.=
Clean Engine Coolklg Fire; I_=
Replace Spark Plug _= If
Replace Ak Filter Paper Cartridge
R.p_=.F._R.. l/
1 * Change mornoften when operating under a heavy load or
In high ambient temperatures.
2 -Ser, dce more often when operaUngin dirty ordusty conditions.
3 - Reldace blades more often when mowlng k_sandy soil.
4 - Notrequited if equipped with malntenance-free batte_,.
5 - Tighten from axle p_votboltto 35 fL-It_, maxln_Jm.
DOnot overtlg_ten.
GENERAL RECOMMENDATIONS
The warranty on thistractordoes not cover
itemsthat have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractoras instructedin this manual.
Some adjustmentswill need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustmentssectionof this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and beltsfor wear. A new
spark plugand clean air filter assure
proper air-fuel mixtureand help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlocksystems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
Spindle ,_ Spindle
Zerk Zerk
_Front Wheel
Bearing Bearing Zerk
Zerk
(_Engine .
',
L
tl I I
L .' '.._J
(])SAE 30 or 10w30 MOTOR OIL
_>GENERAL PURPOSE GREASE
@REFER TO Maintenance "ENGINE"
SECTION
shift
Pivots
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the serf-lubricating bearings. Ifyou feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
17spadngly.
Loading ...
Loading ...
Loading ...