Craftsman 580762200 pressure washer

User Manual - Page 10

For 580762200.

PDF File Manual, 28 pages, Download pdf file

Loading ...
Loading ...
Loading ...
- Turn on the water.
IMPORTANT: Do not runpump withoutthe water sup-
ply connected and turned on. You mustfollow this cau-
tion orthe pump wiltbe damaged.
Move the ThrottleControl Lever tothe 'Fast'
position
® Push primer bulb 3 times. Wait abouttwo 2 seconds
between each push. In cold weather, (55°F/13°C or
below) push 5 times.
Note: Do not use primer to restart a warm engine after a
shortshut down.
Positionthe nozzle in the low pressure mode (nozzle
slidforward) and squeeze the triggeron the spray
gun to relieve the air pressure caused by turning ON
the water. Water willspew out the gunin a thin
stream. Continue to hold triggeruntilyou have a
steady stream of water and no air remains in the sys-
tem. This willmake iteasier to pull startthe engine.
Release the trigger.
= Engage the safety latch on the gun.
- Grasp ropehandle and pull slowlyuntilyou feet some
resistance. Then pull cord rapidlyto overcomecom-
pression, preventkickback and start the engine. Let
rope return to starter slowly ................
Note: Always keep the Throttle Control Lever in the
'Fast' positionwhen operatingthe pressure washer.
Note: if after 3 pullsthe engine fails to start, primethe
engine again, purge the gun and pull the recoil starter
handle rapidly(Max. 3 pulls).
HOW TO STOP YOUR PRESSURE WASHER
- Move the Throttle Control Lever to the 'Slow' posi-
tion.
Wait for the engine to idle down.
. Move the Throttle Control Lever to the 'Stop' position,
Simply shutting off the engine will not release
pressure in the system. Squeeze triggeron the
spray gun to relieve pressure in the hose.
Note: A small amount of water wilt squirt out from the
spray gun when you release the pressure.
SIPHONING
We recommend that you DO NOT siphon standing water
for your water supply. Contaminated, brackish or dirty
water can damage the pump. Connect only to household
water supply.
TIPS
, Never use the garden hose inlet to siphondetergent
or wax .......
If you have the spray nozzle too far away, the clean-
ing willnot be as effective.
]0
Loading ...
Loading ...
Loading ...