Loading ...
Loading ...
Loading ...
Attach Slide Bracket to Cupboard Door
a) Open both cupboard and refrigerator door
to 110˚ degrees. (525 Compact models to
90˚)
b) Put slide bracket in retainer, 120mm
(4
3
/4") approx past refrigerator door.
(diagram 9).
c) Check that screw A (supplied with kit)
will not penetrate front surface of cup-
board door (diagram 10).
d) Screw slide bracket level into the cupboard
door using screw A (supplied with the kit)
e) Check slide mechanism does not bind
through swing of door.
f) Repeat for second bracket.
110˚
Complete Installation
a) If installing a H model with a roll-out humidity drawer then fit the outer door panel
following the instructions in the next section.
b) Otherwise complete the installation by screwing the foot integration into position,
using screw (D) (supplied with the kit), and the cap elliptical to cover the screws.
IMPORTANT
Ensure that refrigerator doors are able to close fully and seal around the flexible gasket
on the refrigerator/freezer. This is to prevent air leaks and icing problems
Screw slide bracket in level
120mm
(4
3
/4")
Diagram 10
Diagram 9
11
Loading ...
Loading ...
Loading ...