Loading ...
Loading ...
Loading ...
- 3 -
these instructions for installation.
24)This appliance is to be properly installed and earthed only by a suitably
qualified person.
25) This appliance should be connected to a circuit which incorporates an
isolating switch providing full disconnection from the power supply.
26) WARNING: Use only cooktop guards designed by the manufacturer of the
cooking appliance or indicated by the manufacturer of the appliance in the
instructions for use as suitable or cooktop guards incorporated in the appliance.
27) The use of inappropriate guards can cause accidents.
28) Failure to install the appliance correctly could invalidate any warranty or
liability claims.
29) Regarding the details of installation, thanks to refer to the section
<Installation>.
30) Connect only to a 3-wire, 240-volt power supply; the neutral conductor is not
required for the operation of the appliance. The potential at the power supply
electrical connections shall be 150-volts-to-ground or less.
Electrical Shock Hazard
• Do not cook on a broken or cracked cooktop. If the
cooktop surface is break or crack, switch the appliance
off immediately at the mains power supply (wall switch)
and contact a qualified technician.
• Switch the cooktop off at the wall before cleaning or
maintenance.
• Failure to follow this advice may result in electrical shock
or death.
Health Hazard
• This appliance complies with electromagnetic safety
standards.
Hot Surface Hazard
• During use, accessible parts of this appliance will
Loading ...
Loading ...
Loading ...