Loading ...
Loading ...
Loading ...
WARNING: Always wear safety gog-
gles complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
WARNING: To reduce the risk of injury
to bystanders, keep them clear of
blowing debris.
CAUTION: To reduce the risk of hear-
ing damage, wear ear protectors when
using the vac/blower for extended
hours or when using it in a noisy area.
WARNING: Wear a dust mask if blow-
ing creates dust which might be
inhaled.
1. Locate blowing port of your vac.
2. Insert the locking end of the "Pos-I-
Lock" hose into the blowing port of the
vac. The hose should snap into place.
To remove the hose from the vac,
press the release button in the hose
assembly and pull the hose out of the
vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose.
4. Turn vac on and you are ready to use
your vac as a blower.
Craftsman recommended accessories are
available at Sears retail stores. The
Sears Blower Nozzle Stock No. 9-16933
is recommended for blowing debris.
Locking
Hose End\
g Port
Extension
Wand
(Optional)
Maintenance
Cleaning Vac Filter
WARNING: To reduce the risk of injury
from accidental starting, unplug power
cord before changing or cleaning filter.
NOTE: This filter is made of high quality
paper designed to stop very small parti-
cles of dust. The filter can be used for
wet or dry pick up. Handle the filter care-
fully when removing to clean or installing
it. Creases in the filter pleats may occur
from installation but creases will not affect
the performance of the filter.
Your filter should be cleaned often to
maintain peak vac performance.
Be sure to dry the filter before storing or
picking up dry debris.
IMPORTANT: After cleaning, check the
filter for tears or small holes. Do not use
a filter with holes or tears in it. Even a
small hole can cause a lot of dust to
come out of your vac. Replace it immedi-
ately.
Filter Removal
To remove the filter for cleaning or
replacement, unscrew the filter nut from
the filter cage, remove filter plate and lift
off filter.
IMPORTANT: To reduce the risk of dam-
age to the blower wheel and motor,
always reinstall the filter before using the
vac for dry material pickup.
11
Loading ...
Loading ...
Loading ...