Loading ...
Loading ...
Loading ...
28
EN
No. Malfunction Possible Causes Solutions
3
The robot's fan doesn't work
after the Safety Pod has been
connected with WINBOT and
attached to the window.
Safety Pod malfunction
Check the Safety Pod Status Indicator Light on the
WINBOT, and refer to Section 5 for details.
WINBOT is in sleeping mode
Press the START/PAUSE Button on WINBOT to wake it
up.
4
Remote Control cannot control
WINBOT.
When WINBOT is cleaning, only the START/
PAUSE Button works on the Remote Control.
Pause WINBOT by pressing the START/PAUSE Button on
the robot or Remote Control. Other buttons on the Remote
Control will function while WINBOT is paused.
The Remote Control is not paired with
WINBOT (WINBOT arrives from the factory
paired with its Remote Control. If the Remote
Control becomes un-paired or is replaced, it
can be re-paired).
Within the rst 5 seconds of powering ON WINBOT, press
and hold START/PAUSE Button on WINBOT and Pairing
button on the Remote Control at the same time. Pairing
is complete when START/PAUSE Button blinks RED and
BLUE and beeps.
WINBOT Status Indicator Light glows a
continuous RED.
Press and hold the RESET Button on the Remote Control
to initialize WINBOT, then the Remote Control will
function.
The batteries are not inserted in the Remote
Control or need to be replaced.
Insert or replace the batteries in the Remote Control.
6. Troubleshooting
Loading ...
Loading ...
Loading ...