Loading ...
Loading ...
Loading ...
E L I T E
Self-Cleaning Cycle
=
w
Remove the broiler pan and grid,
oven racks, utensils, and any foil
that may be in the oven.
Soil on the front frame and
outside the gasket of the door
liner will need to be cleaned
by hand.
Front Frame
/
Clean these areas with hot water,
soap4illed steel-wool pads, or
cleansers such as Soft Scrub ® to
remove any soil. Rinse well with clean
water and dry,
3. Wipe up any heavy spillovers on
the oven bottom.
=
Do not clean the gasket The
fiberglass material of the oven
door gasket cannot withstand
abrasion, tt is essential for the
gasket to remain intact If you
notice it becoming worn or frayed,
it should be replaced
CAREANDCLEANING
The gasket is designed to have a
5"-6" gap at the bottom of the door.
This allows for proper air circulation
Door Panel Gasket
Door Liner
It is normal for your oven door to give
the appearance of not having a good
seal against the oven. This is due to
the gasket. The location of the gasket
on the door maintains a good seal and
prevents any heat loss
_ tensils should never
be left in the oven
during a clean cycle.
The oven racks may be
cleaned during the self-clean
cycle, but will lose their luster
and become hard to slide. If you
choose to leave them in during
the cycle, wiping them with
vegetable oil after the cycle will
help them slide easier.
For the first clean cycle, vent the
room with an opened window or
hood vent. This will reduce the
odor produced when heating
new parts.
26
Loading ...
Loading ...
Loading ...