Danby DER201W Designer 2.4 cu.ft. Range

User Manual - Page 19

For DER201W.

PDF File Manual, 55 pages, Read Online | Download pdf file

DER201W photo
Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
PREPARE TO INSTALL THE RANGE
MATERIALS YOU MAY NEED TOOLS YOU WILL NEED
Drill with 1/8” bit Safety Glasses
Adjustable Wrench
Tape Measure
Pliers Pencil
1/4” Nut Driver Level
Phillips Screwdriver Flat-blade Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
(UL Approved 40 AMP)
Squeeze Connector
(For Conduit
Installations Only)
4-Wire Cord
4’ Long
3-Wire Cord
4’ Long
OR
(1) REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to remove packaging materials could result in damage to the appliance.
(2) PREPARE THE OPENING
Allow 2” spacing from the range to adjacent vertical walls above the cooktop surface. Allow 30” minimum clearance
between the surface elements and the bottom of unprotected wood or metal top cabinets, and 15” minimum between
the countertop and the adjacent cabinet bottom.
To eliminate the risk of burns or re when reaching over hot surface elements, cabinet storage space above the
cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by
installing a range hood that protrudes at least 5” beyond the front of the cabinets. Cabinets installed above a cooktop
may be no deeper than 13”.
Recommended acceptable electrical outlet area.
Orient the electrical receptacle so the length is
parallel to the floor.
Cord
Floor
Outlet box
Wall
2¼”
Wall Mounted
36” max.
2”
Surface
mount
outlet
36”
5”
2½”
15” min.
From
combustible
walls above
cooking surface
either side
40½”
height
A
C
B
30” min.
13”
max.
D
(Depth
with door
open)
Flooring under the range
Your range, like many other household
items, is heavy and can settle into soft
oor coverings such as cushioned vinyl or
carpeting.
When moving the range on this type of ooring,
it should be installed on a 1/4” thick sheet of
plywood (or similar material) as follows:
• When the oor covering ends at the front of the
range, the area that the range will rest on should
be built up with plywood to the same level or
higher than the oor covering. This will allow the
range to be moved for cleaning or servicing.
Model A B C D
20” Wide 20” 20 2” 41”
24” Wide 24” 24 2” 41”
17
Loading ...
Loading ...
Loading ...