Frigidaire FAH14ER2T2 air conditioner

User Manual - Page 7

For FAH14ER2T2.

PDF File Manual, 11 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TO OPERATE ON FAN ONLY:
DOTHmS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
LIGHT ON
YOU W_LL SEE:
Note: Use this function only when cooling is not desired, such as for room air
circulation. You can choose any fan speed you prefer,EXCEPTAUTO FAN.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
Fan Only cannot be selected when the unit is in the 'Remote Sensing' Mode. (On those units with that feature).
TO USE THE
ENERGY SAVER FEATURE:
DOTHBS:
PRESS
MODE BUTTON
CHOOSE
ENERGYSAVER
LIGHT ON YOU W_LL SEE:
Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off, The fan then cycles on for 2
minutes at !0 minute intervals until the room temperature is above the set temperature, at which time the unit cooling
system starts again,
START/STOP FEATURE:
F_RST
DO TH_S:
PRESS TIMER
BUTTON
THEN
DO TH_S:
PRESS TEMP/TIMER
BUTTON
YOU W_LL SEE
THE T_ME CHOSEN:
LIGHT ON
Note 1: For Delay Stop, the unit must be in the OI1 position.
Note 2: For Delay Start, the unit must be in the OFF position.
To adjust timer setting, tap or how the UP arrow (A) or DOWN arrow (v) to change the delay time by .5 hour increments up to
10 hours, then by ! hour increments up to 24 hours. The control will count down the timer remaining until start (8, 7.5, 7,
etc.). The Delay Start mode automatically selects cooling with maximum Fan Speed. The temperature maintained will be the
same as previously set. To change the set temperature, press "COOL" then Up or Down arrows until the desired temperature
is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining
until the unit will start/stop. Turning the unit "ON" or "OFF" at any timer will cancel the Delay Start/Stop function. The delay
Start/Stop feature will work until the unit either starts or stops. Once this has happened then the above steps have to be
repeated again.
Loading ...
Loading ...
Loading ...