Loading ...
Loading ...
Loading ...
14 ASSEMBLING AND PREPARING
Tidying cables
1 Gatherand bind the cables with the cable holder.
holder
'""A CAUTION .-,
Do not move the TV by holding the cable holder,
as the cable holders may break, and injuries and
damage to the TV may occur
Mounting on a wall
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by your
TV model. Carefully attach the wall mount bracket at the
rear of the TV. Install the wall mount bracket on a solid
wall perpendicular to the floor. If you are attaching the
TV to other building materials, please contact qualified
personnel to install the walt mount. Detailed instructions
will be included with the walt mount. We recommend
that you use an LG brand walt mount.
Make sure to use screws and wall mounts that meet the
VESA standard. Standard dimensions for the wall mount
kits are described in the following table.
Modei_ 22LN4500
26EN4500
VESA (A x B) 100 x 100
Standard screw
Number of screws
Wall mount bracket
(optional)
M4
4
LSW130 B
_-_ CAUTION
Disconnectthe power beforemoving orinstalling
the TV. Otherwiseelectricshock may occur.
Ifyou installthe TV on a ceilingorslantedwall,it
may fanand resultinsevereinjury.
Use an authorizedLG wallmount and contactthe
localdealeror qualifiedpersonnel.
Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by misuse
or using an improper accessory are not covered by
the warranty.
_@ NOTE
Use the screws that are listed in the VESA
standard screw specifications.
The wall mount kit includes an installation manual
and necessary parts.
The wall mount bracket is optional. You can obtain
additional accessories from your local dealer.
The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
For more information, refer to the manual supplied
with the wall mount.
Loading ...
Loading ...
Loading ...