Loading ...
Loading ...
Loading ...
Please check the machine according to the following form before asking for maintenance:
Troubleshooting
Problem Possible Cause
P1 Error Code
In COOL mode: room
temperature is lower than
the set temperature
The air filter is blocked with
dust or animal hair
The unit is low on
refrigerant
Temperature setting is too
high
The windows and doors in
the room are open
The room area is too large/small
Troubleshooting
Reset the temperature
Unit does not turn
on when pressing
ON/OFF
but ton
Unit does not cool
well
The unit is noisy
and vibrates too
much
The unit makes a
gurgling sound
Exhaust hose is not
connected or is blocked
The Bottom Tray is full.
Turn off the unit, drain the water
from the Bottom Tray and restart the unit.
There are heat sources
inside the room
filter according to instructions
Turn off the unit and clean the
Call a service technician to inspect
the unit and top off refrigerant
Decrease the set temperature
Make sure all windows and doors
are closed
Double-check the cooling area
hose, check for blockage and
Turn off the unit, disconnect the
reconnect the hose
Remove the heat sources if
possible
The ground is not level
Place the unit on a flat, level
surface
Turn off the unit and clean th
The air filter is blocked with
dust or animal hair
filter according to instructions
This sound is caused by the
flow of refrigerant inside
the unit
This is normal
17
Loading ...
Loading ...
Loading ...