Loading ...
Loading ...
Loading ...
MAINTENANCE : : i
m Cleaning the Dispenser
The dispenser may need to be cleaned periodically due to laundry additive build-up
f
Remove the liquid detergent
1] Puff the dispenser O Press down the tocktab box, softener and bleach
drawer out until it stops on the bieach insert inserts from their
1
Remove the drawer compartments
Run warm water and use a soft brush or cloth on the drawer, liquid detergent box and inserts to remove any excess
laundry additives,
* Clean the drawer opening using water and a small brush
* Follow the illustrations in reverse order to replace the parts to their proper location
NOTE: Do not use any cleaning substance on the drawer opening olher titan water because it will drain into the tub,
If this should happen, set the washer for a rinse anti spin cycle to remove :my cleaning subslance from tire
washer befnre doing a load of laundry°
,. The washing drum
If you tivein a hard water area, lime scale can continuously build up in places where itcannot be seen
and it isnot easily removed from the drum
Over time the build-up of scale clogs appliances, and if it is not kept in check, these wilt eventually
have to be replaced
•Afthough the washing drum is made of Stainless steel, specks of rustcan be caused by small metal articles
(paper clips, safety pins, etc ) which have been left inthe drum
The washing drum should be cleaned from time to time
If you use descaling agents, dyes, or bleaches, make sure they are suitable for washing machine use.
Descaler could contain components that can damage part of your washing machine
Remove the spots with a stainless steel cleaning agent
Never use steel wool
18
Loading ...
Loading ...
Loading ...