Loading ...
Loading ...
Loading ...
Preparation
Bottom Mount Refrig'erator
Refrigerator
location
Do not install refrigerator where temperature
will be below 60°F (16°C) because it will not
run often enough to maintain proper
temperatures.
Do install it on a floor strong enough to support
a fully loaded refrigerator.
Clearances
If the refrigerator is to be installed in a corner,
allow 2" (51 mm) between the hinges of the
refrigerator and the wall to assure a 90 ° door
opening capabilily.
No other clearances at top, sides or back are
required.
Leveling This model has 4-point leveling. All 4 corners
are supported by leveling legs. The front wheels
are non-adjustable; they are only used for
positioning the unit.
• To level the back of the unit, turn hex nut
located above the fl'ont wheels.
• To level the fl'ont of the unit, use a 1_/,"open
end wrench and adjust 1he leveling legs.
• Turn hex nut or fi'ont leveling leg clockwise
to raise dae unit, counter-clockwise to lower
the unit,
See the Installation Instructions (Pub. No.
49-6983) for complete directions.
Hex Nut
Wheelj
• Leveling Leg
15
Loading ...
Loading ...
Loading ...