Loading ...
Loading ...
Loading ...
230
Shooting Settings
D
Exposure and Flash Bracketing
•
[Number of shots] and [Increment] can also be selected via the [Auto
bracketing] item in the photo shooting menu.
•
In continuous release modes, shooting will pause after the number of
shots specified in the bracketing program have been taken. Shooting
will resume the next time the shutter-release button is pressed.
•
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted to
make room on the memory card. If the camera is turned off before all
shots in the sequence have been taken, bracketing will resume from the
next shot in the sequence when the camera is turned on.
A
Bracketing Options
When [AE & flash bracketing] is selected, the camera varies both
exposure and flash level. Select [AE bracketing] to vary only exposure,
[Flash bracketing] to vary only flash level. Note that flash bracketing is
available in i-TTL and, where supported, auto aperture (
q
A) flash control
modes only (
0
462, 798).
A
Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture
(mode P), aperture (mode S), or shutter speed (modes A and M). If [On] is
selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in
modes P, S, and A, the camera will automatically vary ISO sensitivity for
optimum exposure when the limits of the camera exposure system are
exceeded; in mode M, the camera will first use auto ISO sensitivity control
to bring exposure as close as possible to the optimum and then bracket
this exposure by varying shutter speed.
Loading ...
Loading ...
Loading ...