Loading ...
Loading ...
Loading ...
6
YOUR HEATER IS EQUIPPED WITH A THERMOSTAT:
1. Turn the unit ON by turning the thermostat dial away from the OFF position.
2. For faster heat-up or to increase the heat output, turn the Thermostat Control knob all the way to the right [HIGH].
The thermostat function controls the temperature output. To decrease the heat output, turn the knob counter-
clockwise.
3. Once the room reaches the desired temperature, slowly turn the Thermostat Control knob counter clockwise until
you hear a “click.” This sets the heater to cycle ON/OFF to maintain the desired heating temperature for energy
efficiency.
4. To completely shut off the unit, turn the thermostat dial to the OFF position and unplug the heater.
Model Number
DR-988
Power Supply
240 volts AC, 60Hz
Power Consumption
5600W
Thermostat Temperature Range: 37˚F~113˚F (3˚C~45˚C)
Before any cleaning, make sure that:
1. The heater is turned OFF.
2. The power supply is disconnected at the source, by removal of the plug from the power outlet.
Your heater is now ready for cleaning.
Regular Cleaning:
1. Do not use cleaning liquid or other chemicals to spray on the unit.
2. Interior dust can often be removed by using a vacuum cleaner with a crevice tool attachment.
3. To clean enclosure, use a clean, soft, lightly damp cloth to gently wipe off the dirt from the surface of the unit. Be
sure not to wet the heating element and the switches. Allow the unit to dry completely before using it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS COULD CREATE
A FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.
1. Perform the cleaning procedures described in CLEANING AND MAINTENANCE.
2. Wipe dry all parts.
3. Pack the heater in a plastic bag and store it in a cool, dry place.
CLEANING AND MAINTENANCE
STORAGE
SPECIFICATIONS
Loading ...
Loading ...