Loading ...
Loading ...
Loading ...
English
6
Convert to Edging Mode (Fig. A, L)
The trimmer can be used in trimming mode or edging
mode to trim overhanging grass along lawn edges and
flowerbeds.
WARNING: Disconnect the plug from the
power source before making anyadjustments.
WARNING: When being used as an
edger, stones, pieces of metal and other objects can be
thrown out at high speed by the line. The trimmer and
guard are designed to reduce the danger. However,
MAKE SURE that other persons and pets are at least
100' (30m)away.
1. To operate as a maintenance edger, turn the collar
7
as
shown in Fig. L.
2. Hold the metal shaft and rotate the lower housing 180°
as shown in Fig. L.
3. Turn the collar back untiltight.
nOTE: The metal shaft and housing will only rotate in
onedirection.
4. Pull the edge guide
11
out of the motor housing
8
until it clicks into place. Ensure it is full engaged and can't
be easily pushed back into the housing before edging.
Feed Button (Fig. A)
The feed feature allows you to advance the length of cutting
line available while trimming.
To extend the cutting line, fully depress the
feed button
2
while trimming and then release.
nOTE: The trimmer will stop cutting when the feed button
is pressed and will resume cutting whenreleased.
• For maximum line length, press the button multiple
times until you hear the cutting line hitting the guard.
nOTE: Do not continue to press the feed button once the
maximum length is reached. This will result in overfeeding
and will consume stringquickly.
nOTE: It is normal for a small amount of line to feed when
you start the trimmer. This helps ensure you are working
with a full swath size.
Operating the Trimmer (Fig. I, J, K)
With the trimmer on, angle it and swing side to side as
shown in Fig.I.
Maintain a minimum distance of 24" (610 mm) between the
guard and your feet as shown in Fig. J.
Maintain a cutting angle of 5° to 10° as shown in
Fig. K. Do not exceed 10° (Fig. K). Cut with the tip of the line.
Switching On and Off (Fig. A)
To switch the trimmer on, squeeze the trigger switch
1
.
To switch the trimmer off, release the triggerswitch.
Fig.I
Fig.J
Fig.H
5
6
Fig.K
24" (610 mm)
Loading ...
Loading ...
Loading ...