Loading ...
Loading ...
Loading ...
Use
75
EN
Controls lock
1. With all cooking zones off,
simultaneously turn the two front right
and rear right cooking zone control
knobs anti-clockwise (position A).
2. Keep them turned until the symbols
appear on the display.
3. Release the knobs.
In order to remove the control lock repeat
the same operations described previously.
Error codes
If the display shows one of the following
error codes , , contact Technical
Assistance.
Hob power limitation
1. Disconnect the appliance from the mains
power supply and wait 10 seconds
before turning the power back on.
2. Turn the front left and front right cooking
zone knobs anticlockwise at the same
time (to position “M-A” and “A”
respectively), and keep them in this
position for 3 seconds.
The rear left and rear right cooking zone
displays will indicate “7.” and “4”.
3. Release the knobs.
The controls lock is a device that
protects the appliance from
accidental or inappropriate use.
If the knobs have been kept turned
to the A position for more than 30
seconds, the following fault
message appears on the
display.
After a prolonged period of
interruption to the power supply,
the control lock will be
deactivated. If this is the case, turn
it back on as described above.
The induction hob is configured to
operate at 7.4 kW, but it can be
set to operate at 4.8 kW or 3.7
kW.
The power level of the hob must be
set within 2 minutes of it being
connected to the mains power
supply.
Loading ...
Loading ...
Loading ...