Loading ...
Loading ...
Loading ...
14 49-2001056 Rev. 0
Settings (Cont.)
Wifi Connect (cont.)
To connect additional smart devices, disconnect from
WiFi and the first device, then reconnect to WiFi and
repeat steps 1 and 2. The unit can only be connected to
one device at a time.
Note that any changes or modifications to the remote
enable device installed on this oven that are not
expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely once connected to
WiFi, press the Remote Enable pad and the icon will
turn on in the display. The oven can now be remotely
started with a connected device. The icon must be lit
to start the oven remotely. The icon is not required to
change the oven temperature while it is running, set a
timer or to turn the oven off from the phone app while the
icon shows it is Wifi Connected.
To disconnect your phone from Remote Enable, press
the Remote Enable pad and the icon will turn off.
NOTE: )RRGVWKDWVSRLOHDVLO\²VXFKDVPLONHJJVILVK
VWXIILQJVSRXOWU\DQGSRUN²VKRXOGQRWEHDOORZHGWR
sit for more than 1 hour before or after cooking. Room
temperature promotes the growth of harmful bacteria. Be
sure that the oven light is off because heat from the bulb
will speed harmful bacteria growth.
Clock
This setting sets the oven clock time. Press the Settings
pad and select Set Clock. Follow the instructions to set
the clock. This feature also specifies how the time of
day will be displayed. You can select a standard 12-hour
clock (12H), 24-hour military time display (24H), or no
clock displayed (Off). Press the Settings pad, select Set
Clock and select either 12/24 hr or On/Off.
Bluetooth
®
- Chef Connect
This is a pairing feature for use with other compatible
Chef Connect enabled products like an over-the-range
microwave oven or range hood. To pair those products to
the range Press the Settings pad and select Bluetooth
®
.
Select Pair and follow the corresponding instructions
included with the mating Chef Connect enabled product.
The range will cancel pairing mode after two minutes if
no mating device is detected. Select Remove to confirm
product is paired or to un-pair from range.
Auto Conv (Auto Conversion)
When using Convection Bake cooking, Auto Recipe
Conversion will automatically convert the regular baking
temperatures entered to convection bake cooking
temperatures when turned on. Note that this option
does not convert convection bake cooking times, it only
converts temperatures. This feature may be turned On or
Off. Select Settings and Auto Conversion, then follow
the prompts to turn this feature on or off.
Auto Off
This feature shuts the oven down after 12 hours of
continuous operation. It may be enabled or disabled. Select
Settings, More, and Auto Off to turn this feature on or off.
Sound
You can adjust the volume and type of alert your
appliance uses. Select Settings, More, and Sound.
Follow prompts for making volume adjustments or for
changing between continuous and single alert tones. A
continuous setting will continue to sound a tone until a
button on the control is pressed. The oven tone volume
can be adjusted between several settings and off. The
control will sound the oven tone at the new volume level
each time the sound level is changed.
F/C (Fahrenheit or Celsius)
The oven control is set to use Fahrenheit temperatures
(F), but you can change it to use Celsius temperatures
(C). Select Settings, More, and F/C to alter between
temperature scales displayed.
Adjust the Oven temperature
This feature allows the oven cooking modes to be
adjusted up to 35ºF hotter or down to 35ºF cooler. Use
this feature if you believe your oven temperature is too hot
or too cold and wish to change it. This adjustment affects
Bake and Convection Bake modes. No other cooking
modes are affected. Select Settings and Oven Adjust to
add More Heat or Less Heat and then press Save (for
double ovens use the Upper Oven or Lower Oven menu
selection corresponding to the oven to be adjusted).
Oven Info
To display the model number and software version on
your unit, select Settings, More, and Oven Info.
USING THE RANGE: Settings
Loading ...
Loading ...
Loading ...