Loading ...
Step 2
Step 6
Step 1
Step 2
Step 7
Step 8
Remove the card board.
Install specified bulb type and
wattage (not included).
Power
Cord
Chain
Lower
Connector
Canopy
Nipple
Upper
Connector
Nut
To attach chain loop to light fixture, use a screwdriver and
wrench to open and close chain loop. Ensure to close the
opening. Weave the power cord and ground wire through
the links in the chain.
Loosen the nut on the upper connector and slide it down the
chain towards the lower connector. Slide the canopy down the
chain towards the lower connector. Feed the wire through
nut, canopy, the upper connector and onto the nipple. Tighten
the upper connector onto the nipple. Spread the other end of
the chain open and fasten to the upper connector. Ensure the
opening is closed.
Connect the ground wires (bare copper or green) from your
fixture to the ground wire (bare copper or green) or ground
screw in the electrical box. Connect the black wire (or wire
marked “SPT-1”) from the fixture to the black wire in the
electrical box and connect the white wire (or the wire with
ribbed side) from the fixture to the white wire in the electrical
box.
Step 2
Step 9
Step 2
Step 10
Canopy
Nut
Once connections of wires are completed, carefully tuck wires and
wire nuts into the outlet box making sure no bare wire (on the
black and white) is visible at the wire nuts. Slide canopy into
position and tighten in place by nut into position.
Tel: (613) 342-5424, Fax: (800) 263-4598
Bulb
Black
House supply
Ground wire
Fixture
Ground
wire
White
Step 5
Nipple
Hex Nut
Electrical Box
Electrical Box Screws
(not included)
Mounting
Bracket
Attach the mounting bracket to the electrical box using electrical
box screws (not included). Attach the nipple to the mounting
bracket and adjust until it will clear the canopy when assembled
(Place the canopy over the nipple and tighten the upper
connector onto the nipple until snug. The upper connector
should hold the canopy snug to the ceiling). Lock the nipple in
the correct position using the hex nut.
Loading ...
Loading ...