Loading ...
Loading ...
Loading ...
9
www.KALORIK.com
VC 46599 - 200605
4. Remove the dust container from the vacuum cleaner by pressing
the release button (A) and taking out the dust container (B). See
the figure below for reference.
5. Turn the upper lid and remove it from the dust container (C). Take
the dust separation system and filter from the dust separation
system (D). See the following figure for reference.
6. Rinse the filter and the dust separation system thoroughly in
lukewarm water.
7. Allow the filter to dry thoroughly.
8. Mount the holders and filters in the reverse sequence.
TROUBLESHOOTING
ISSUE
POSSIBLE REASON
POSSIBLE SOLUTION
The vacuum
cleaner will not
start.
Power cord is not
firmly plugged into
the outlet.
Check that the plug is
inserted firmly into the
electrical outlet.
Low suction
1. Dust container is
full.
2. Dust filter needs
cleaning or
replacement.
3. Power is low.
1. Empty dust container.
2. Remove dust cup filter
and check for object(s)
in air duct and remove.
Clean or replace dust
filter.
3. Charge unit.
Loading ...
Loading ...
Loading ...