Loading ...
Loading ...
Loading ...
REMINGTON ELECTRIC BLOWER/VAC I S
Converting from
Blower to Vacuum
_k, WARNING: To Reduce The
Riskof Personal injury or Electric
Shock- Disconnect from power
source before assembling or
changing attachments.
Follow the steps below to convert from
blower to vacuum. IMPORTANT: The
vacuum will not run unless the vacuum
tube assembly is locked into place.
1. Press locking lever on bottom inlet
cover and remove bottom inlet cover
from blower/vac. Remove blower tube
from blower/vac.
2. Slide vacuum tube adapter onto outlet
on front of blower/vac housing (see
Figure 3-6). Securely connect the
draw latch to the vacuum bag adapter
(see Figure 3-7).
3. Connect the lower and upper vacuum
tubes together (see Figure 3-8). Align
the ridge on the bottom tube with
the channel on the top tube. Press
together until you hear a "snap".
Figure3-6: Slidingvacuumtubeadapterintoplace
Figure3-7: Connectdrawlatchto vacuumbagadapter
(9
Figure3-8:Conntectingloweranduppervacuumtube
together
120133
Loading ...
Loading ...
Loading ...