Loading ...
Loading ...
Loading ...
39
Step 1: Cut pipes
When preparing refrigerant pipes, take extra care
future maintenance.
1. Mea sure the distance between the indoor and
outdoor units.
2. Using a pipe cutter, cut the pipe a little longer
than the measured distance.
3. Make sure that the pipe is cut at a perfect 90°
angle.
Oblique Rough Warped
90°
Be extra careful not to damage, dent, or deform the
pipe while cutting. This will drastically reduce the
Refrigerant Piping Connection
enter the unit. The presence of other gases or substances will lower the unit’s capacity, and can cause
abnormally high pressure in the refrigeration cycle. This can cause explosion and injury.
Note on Pipe Length
MODEL
R410A,R32 Inverter
Split Air Conditioner
25 (82ft) 10 (33ft)
30 (98.5ft) 20 (66ft)
50 (164ft) 25 (82ft)
R22 Fixed-speed
Split Air Conditioner
10 (33ft) 5 (16ft)
15 (49ft) 8(26ft)
20 (66ft) 10(33ft)
R410A, R32 Fixed-
speed Split Air
Conditioner
20 (66ft) 8(26ft)
25 (82ft) 10(33ft)
Loading ...
Loading ...
Loading ...