Loading ...
Loading ...
Loading ...
Care and Cleaning
Replacing the Oven Light
Be sure the oven is unplugged and all parts are
cool before replacing oven light.
The interior oven lights are located at the rear of the oven cavity
and are covered with a glass shield. The glass shield must be in
place whenever the oven is in use (Figure 29).
To replace the oven interior light bulb:
1. Turn electrical power off at the main source.
2. Remove interior oven light shield by turning a quarter turn
counter-clockwise.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
Important note:
Do not allow your fingers to touch the new bulb when replacing.
This will shorten the life of the bulb. Use a paper towel or cotton
glove while handling the new bulb when installing.
4. Replace glass oven light shield by rotating clockwise.
5. Turn power back on again at the main source (or plug the
appliance back in).
6. Be sure to reset the time of day on the clock.
General Cleaning
Refer to "Cleaning Various Parts of Your Oven" on page 27 for
more detailed information about cleaning specific parts of your
oven.
Before manually cleaning any part of the oven,
be sure all controls are off and the oven is cool. The oven may
be hot and can cause burns.
Ammonia must be rinsed before operating the
oven. Provide adequate ventilation.
Aluminum Foil and Utensils
Never cover any slots, holes, or passages in the
oven bottom or cover an entire oven rack with materials such as
aluminum foil. Aluminum foil linings may trap heat, causing a
fire hazard.
Protective Liners--Do not use aluminum foil to
line the oven bottom. Only use aluminum foil as recommended
in this manual. Improper installation of these liners may result in
risk of electric shock or fire.
Figure 29: Wall oven Halogen light
29
Loading ...
Loading ...
Loading ...