Loading ...
Loading ...
Loading ...
INSTALLATION
ELECTRICAL OUTLET AND ANTI-TIP BLOCK
To reduce the risk of tipping the drawer, the anti-tip block must be properly located
1 4-13/16” above the floor on which the microwave drawer will sit. The 6” anti-tip block
must be provided by the installer. The anti-tip block prevents serious injury that might
result from spilled hot liquids. If the microwave drawer is ever moved to a di rent
location, the anti-tip block must also be moved and installed. When secured to the
wall, make sure that the screws completely penetrate the dry wall and are secured in
wood or metal so that the block is totally stable. When fastening, be sure that the screws
do not penetrate electrical wiring or plumbing. The electrical requirements are 120
volt, 60 Hz, AC only, 15 amp. It is recommended that a separate circuit serving only
this appliance be provided. The drawer is equipped with a 3-prong grounding plug
and must be plugged into a wall receptacle that is properly installed and grounded.
Should you only have a 2-prong outlet, have a qualified electrician install a corrrect wall
receptacle.
NOTE: If you have any questions about the grounding or electrical instructions, consult
a qualified electrician or service person. The microwave drawer can also be installed
using an electrical outlet in an adjacent cabinet within the area where the provided
electrical cord can reach. ALWAYS check electrical cord can reach.
Appliance Dimensions
23
7
/
8
"
(606 mm)
21
5
/
8
"
(549 mm)
Approx. 46"
(1,168.4 mm)
1
11
/
16
"
(39 mm)
23
3
/
8
"
(594 mm)
21
7
/
8
"
(556 mm)
38
3
/
8
"
(974 mm)
14
5
/
8
"
(371 mm)
16
5
/
16
"
(414 mm)
Anti-Tip
block
6"
3
1
/2"
4"
5"
Suggested electrical
outlet location*
9
Loading ...
Loading ...
Loading ...