Loading ...
Loading ...
Loading ...
STEP 8.2: Insert the assembled glass tubes into the heater
by holding the base in one hand, top in the other, and
insert the tube underneath the flame screen (PART AA).
STEP 8.3: After inserting one side into the flame
screen (PART AA), place the lower end on the rubber
ring (PART DD) on top of the ceramic burner.
CAUTION
Make sure two glass tubes are tightly connected.
After assembling, the total length should be 49.5 in/125.7cm.
Avoid scratching the interior surfaces of tubes with the
stainless steel ring while joining the tubes.
STEP 8.4: Before inserting the assembled tube, please
make sure the tubes are fully connected. A bad
connection may cause damage to the glass tubes.
STEP 8.1
: Slide the other side of stainless steel
ring (PART DD) into the second glass tube(PART EE)
by squeezing the stainless steel ring
together( PART DD).
5
Loading ...
Loading ...
Loading ...