Loading ...
Loading ...
Loading ...
Cleaning and care
39
ENEN
Cleaning the jug
1. Empty the jug after each use to prevent
staining caused by residues of coffee.
2. Wash the jug in hot, soapy water using a
soft brush.
3. Rinse and dry thoroughly.
4.4 Descaling
Depending on the water hardness setting,
the machine automatically indicates when
descaling has to be carried out.
The DESCALING icon starts to
flash on the display to warn the user that a
descaling cycle should be carried out.
To start the descaling cycle:
1. Pour water and the descaler into the
water tank.
2. Press the ON/OFF and AUTO
START buttons simultaneously for 5
seconds to start the DESCALING cycle:
the LEDs of the ON/OFF and
AUTO START buttons flash and the
DESCALING icon flashes
until the end of the cycle.
3. At the end of the cycle, the display reverts
to CLOCK mode and the DESCALING
icon disappears from the
display.
4. Rinse the appliance by operating it with
just water for at least 2 cycles, filling the
tank to its maximum limit (1.4 litres).
Risk of damaging the jug
• Do not wash the jug in a dishwasher as
it could become permanently damaged.
Danger of personal injury and
damage to the appliance
• Limescale deposits can prevent the
appliance from working correctly,
especially if the water is particularly
hard.
• The descaler contains acid which can
irritate the skin and eyes.
• Follow the manufacturer’s instructions
and safety warnings on the pack to the
letter; they will also tell you what to do in
the event of contact with skin or eyes.
• Use descaling products recommended
by Smeg to avoid damaging the drip
coffee machine.
Loading ...
Loading ...