Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE _,_,_ ,_-_ ,_-_ _ ,._ _
AsCOMPLETE
REGULAR SERVICE DATES
%T?:;°::r?°°
Check Operator Presence and
T Interlock Systems I[_
R Check for Loose Fasteners I_ 1_5 I_
Sharpen/Replace Mower Blades i3
T Lubrication Chart I_
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxie Cooling I_
Check V-Belts I1_
Check Engine Oil Level I_
Change Engine Oil (with oil fitter) 1_,2 I_
E Change Engine Oil (without oil filter) _,_
,/
N Clean Air Filter _1_12
G Clean Air Screen 1_2
_ inspect Muffler/SparkArrester I_
E Replace Oil Filter (If equipped) _ 2
Clean Engine Cooling Fins I_ 2
Replace Spark Plug I1_
Replace Air Fitter Paper Cartridge I/2
Replace Fuel Filter
I = Change more often when Operating under a heavy load or
in high ambient temperatures.
2 = Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-f ree battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
LUBRICATION CHART
(# _ Spindle
Zerk Zerk
(#Front Wheel
Bearing
Zerk
:I dbFront Wheel
, Zerk
General Purpose Grease
REFER TO Maintenance "ENGINE" SECTION
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18
Loading ...
Loading ...
Loading ...