Loading ...
Loading ...
Toavoidthumping/clatteringnoisesduringoperation:Load
dishessotheydonottouchoneanother.Makesurelightweight
loaditemsaresecuredintheracks.
Whenloadingsilverware,alwaysplacesharp
itemspointingdownandavoid"nesting"as
shown.
STEP 2
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
Fresh automatic
dishwasher detergent
results in better
cleaning. Store tightly
closed detergent
container in a cool,
dry place.
A ............
A. Cover latch
B. Main Wash section
C. Pre-Wash sec#on
• The amount of detergent to use depends on:
How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown
are for standard powdered
detergent. Follow
instructions on the package
when using other
dishwasher detergent.
MainWash Pre-Wash
Add Rinse Aid
• Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.
• Rinse aid keeps water from forming droplets that can dry as
spots or streaks. They also improve drying by allowing water to
drain off of the dishes after the final rinse.
• Rinse aid helps to reduce excess moisture on the dish racks
and interior of your dishwasher.
• Check the rinse aid indicator. Add rinse aid when indicator
drops to "Refill" level.
To add rinse aid, turn the dispenser
cap counterclockwise and lift off. Pour
rinse aid into the opening until the
indicator window looks full. Replace
the dispenser cap and turn clockwise.
Make sure cap is fully locked.
turn to lock
NOTE: For most water conditions, the
factory setting of 2 will give good results. Ifyou
have hard water or notice rings or spots, try a
higher setting. Turn the arrow adjuster inside the
dispenser by either using your fingers or inserting a
flat-blade screwdriver intothe center of the arrow ....
and turning.
STEP 3
Select a Cycle (cycles vary by model)
..........................
.... ..... Auto ....
NOTE: Heavier cycles and options affect cycle length. Some
cycles and options will take up to 3V2hours to complete.
Cycles
Heavy Wash - Use for heavily soiled, hard-to-clean items.
Normal Wash - Use for normal food soil. The energy usage label
is based on this cycle.
Light Wash - Use for light food soil.
Rinse Only- (no options apply to this cycle) Do not use detergent.
This is only a rinse that keeps food from drying on your dishes and
reduces odor buildup in your dishwasher until you are ready to
wash a full load.
Insta Wash - Quick cycle for light food soils.
Auto Clean - Use for automatically selecting the number of water
fills best suited for the soil level.
Select Options (options vary by model)
You can customize
your cycles by
pressing the options
desired.
Options
iiiiiiiii_
Heated Dry - (all cycles except Rinse Only) use for best drying
results. Turn off by pressing Heat Dry so that the light goes off.
Delay Hours- (any cycle) offers the choice to start the dishwasher
automatically at a later time. Select a wash cycle and options.
Press Delay Hours. Press START/Cancel. Close the door firmly.
Sanitize - (all cycles except Insta Wash and Rinse Only) To
sanitize your dishes and glassware in accordance with NSF/ANSI
Standard 184 for Residential Dishwashers. Raises the water
temperature in the final rinse to approximately 155°F (68°C).
Certified residential dishwashers are not intended for licensed food
establishments.
Tough Scrub (or Tough Scrub Plus) - Use for heavy food soils
and lightly baked-on or dried-on food.
Hi-Temp Wash - (use only with Pots & Pans and Normal wash
cycles) heats the water during the wash portions of the cycle.
Loading ...
Loading ...
Loading ...